| How to Change a Samsung Cartridge |
[21 Feb 2017|09:44am] |
One of the easiest things you can do to keep your printer printing at an optimal level is to change the toner cartridge. Even if the printer is an all-in-one, like the Samsung SCX-4500W, the process can be completed with a few easy steps. And fortunately, you don't even have to guess when the time to change the cartridge comes. This model actually tells you it's time by displaying messages on its screen and by blinking LED lights on the control panel.
To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary. Do not touch the green area of the toner cartridge. Use the handle on the cartridge to avoid touching this area. Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. When opening a scan unit, hold the document feeder and scan unit together.
How to Change a Samsung Toner
Turn the printer's power off. The power button is located on the control panel on the top of the printer, on the right side.
Open the printer's top cover by pressing the top cover lever, which is located on the bottom side of the top cover.
Lift the cover all of the way open.
Locate the toner cartridge. It will be right in the center of the printer and has a handle on the top of it. Grab the handle and pull the cartridge out.
Hold the replacement cartridge at its side and gently rock it back and forth. This will help to distribute the toner equally throughout the cartridge.
Remove the paper cover from the top of the cartridge.
Insert the replacement cartridge into the printer and close the printer's top cover.
Finally, V4ink is the cheapest place to buy printer ink.
|
|
| Printer paper jam and its solution |
[21 Feb 2017|09:45am] |
Printer toner in the course of frequent use, often can not handle the paper failure, mostly paper jam, not into the paper, a paper into the multi-page and the phenomenon of random paper. How do these failures to deal with it after that?
1, the paper surface is smooth. If the phenomenon of paper jams, first of all should see the paper surface is flat, if there is paper curl or fold phenomenon, it is best to use the surface smooth, smooth paper, and to ensure that the printing paper surface can not have a similar plastic adhesive.
2, the paper is too thin or too much. Must ensure that the quality of printing paper more than 60 grams or more, the paper is too thin will cause the printer to become difficult when you take the paper, the printer is likely to cause a paper jam. And once into the printing paper can not be too thick.
3, the pickup roller wear. The pick roller is the most wearable part of the printer. When the Sheng tray of normal paper, and can not take the paper, the paper roller is often wear or spring loose. Pressure is not enough, the paper can not be fed into the machine. Pickup roller wear, can not be replaced at the moment, the available wound rubber band approach for emergency treatment. Winding rubber band, the increase in the rubbing friction, make paper back to normal.
4, other. Sheng tray is not properly installed, the paper quality is not good (too thin, too thick, wet), also may cause a paper jam or can not take the fault.
Printer ink refill, help you print high-quality documents, photos, and graphics.
Cheapest place to buy printer ink
|
|