| How to Replace Your Samsung Printer Cartridges |
[17 Feb 2017|09:44am] |
Part of saving time is just being prepared. When an ink cartridge runs out, you don't want to have to drop everything and run to the store. If your office uses Samsung printers and supplies, you may want to get acquainted with Samsung printer cartridge replacement. When it's time to swap out an old printer cartridge, you can save time by following some simple steps. Here are some simple instructions for replacing your Samsung printer cartridges, so you can get back to printing.
Replacing Printer Cartridges:
1.Open the printer utility software. Samsung tries to make replacing samsung printer cartridge simpler by automating most of the steps for you. Explore your printer utility software and learn a bit more about how it works. To replace one of your Samsung printer cartridges, you'll need to open the cartridge replacement utility.
2.Move the cartridge head into place. Have your Samsung printer cartridges ready and follow the utility instructions to move the cartridge head into place.
3.Remove the old ink cartridge. Open the panel concealing the printer head and the old Samsung printer cartridges. Release the clips holding the empty one and pull it out. Remember to recycle your old Samsung printer cartridges. Samsung may even buy them back.
4.Prepare the new cartridge. Remove the appropriate Samsung printer cartridges from the packaging and shake them vigorously.
5.Insert the new cartridge. Remove the tag from the bottom of each Samsung ink cartridge, being careful not to touch any contacts or circuitry. Slip each cartridge into its space and press down until it clicks into place.
6.Close the printer. Close the printer lid or panel. The printer head should slide back into place and start charging your new cartridges.
Samsung Printer Cartridge Tips:
1.Samsung may recycle your hp 201x toner, or you can donate them to local recycling programs.
2.Unless your printer is malfunctioning, avoid printing test pages that can use a lot of ink.
|
|
| How to Replace a Toner Cartridge in a Laser Printer |
[17 Feb 2017|09:44am] |
Printer cartridge eventually run out of ink after continued use. Being able to replace them swiftly and correctly lets you get back to work faster. If you want to learn how to replace a toner cartridge in a laser printer, follow these steps.
1.Turn on the printer by pressing the power button. You have to have the device on to access brother toner cartridge of most units.
2.Open the printer door to access the toner cartridges. In some models, you will have to press and hold the release button and pull the lid toward you. When the cover is lifted on most laser printers, the carriage automatically slides to the right side of the unit for easy access to the cartridges.
3.Remove the spent cartridge from the printer. Depending on the model, you may have to unhook the cradle holding the cartridge in place, or press the release tab inward to unlatch the cartridge you want to remove. With some printers, you may have to hold down the blue release button at the side of the cartridge carriage. Once unlocked, remove the cartridge by pulling it up and toward you.
4.Take the new cartridge out of the box, but keep it in its plastic packaging. Sometimes, during shipping, ink can settle in the toner drum, resulting in poor-quality copies. To prevent this problem, gently shake the cartridge. This helps fully distribute toner throughout the cartridge.
5.Remove the new cartridge from its packaging and pull the colored tab on the cartridge. This removes the protective tape from the bottom of the cartridge. While doing this, be careful not to touch the imaging drum on the bottom of the print cartridge. Smudges on the drum can cause print-quality problems.
6.Put the replacement cartridge in. It should snap in place securely. On devices with a locking cradle, be sure to snap it shut around the cartridge before closing the lid.
7.Your printer is ready to be used. Print a test page. Your computer will automatically recognize that a new hp ink cartridges has been installed. Most computers will ask you if you want to print a test page to ensure that the new cartridge is functional. Click "OK." The computer will scan the printer settings and eventually produce a full-color page.
|
|