| Installation Guide of Tn660 Toner |
[06 Feb 2017|01:55pm] |
The Brother DCP-L2540DW is a dependable, economical monochrome laser multi-function copier for home or small office use. With its solid design and price tag, this copier is a desk-friendly machine that you can trust. It has an up to 250-sheet capacity tray, connects with ease via wireless networking or Ethernet, and prints and copies at up to 30ppm. It also has the ability to print from compatible mobile devices over your wireless network, and scan documents to a variety of destinations.
The Brother DCP-L2540DW uses a TN660 black toner (powder-based) instead of ink, so you get smudge-free images and text. Toners eventually run out after continued use. It is advisable to have an adequate printing supply in your home or office for maintaining operations. Stocking up on supplies will help to keep your copier running efficiently. V4ink offers a high quality replacement Brother TN660 toner cartridge(http://www.v4ink.com/Brother-TN660-TN630-Black-toner-cartridge) for the Brother DCP-L2540DW printer. This toner is professionally engineered to meet or exceed the genuine specifications and quality output of the brother tn 660(http://www.v4ink.com/Brother-TN630-TN660-Toner-Cartridge). It offers a printing yield of up-to 2,600 pages ideal for high-volume printing.
Being able to replace your copier’s toner cartridge (http://www.v4ink.com/) quickly and correctly lets you get back to work faster. If you are looking for quick and easy steps on how to replace the printer cartridge (http://www.v4ink.com/) in your Brother DCP-L2540DW, follow the instructions below.
Step 1 – Turn on your machine and open the front cover.
Step 2 – Take the empty toner out by pushing down the lock lever on the drum unit assembly. It is a good idea to grab some paper towel just in case your old toner spills so you won’t have a hard time cleaning it up on your table. Wrap up the empty toner before keeping it to somewhere safely.
Step 3 – Unpack the new ink cartridges (http://www.v4ink.com/). Try shaking it a few times carefully before removing the orange shield or protector. It is actually quite possible that the powder substance inside it has settled during storage. Shaking allows the toner powder to spread evenly on the inside. thus, getting as many page prints as possible.
Step 4 – Install the new toner by putting it into the drum unit. This should just fall into its position and snap into place.
Step 5 – Move the corona wire cleaner back and forth several times and put the whole thing back into the machine then close the cover.
The copier will then figure out for itself and detect the new toner installed. Press the “Go” button three times to print a test page. When it’s done, then you’re ready to go!
If you want to stock up on TN660 toner (http://www.v4ink.com/Brother-TN630-TN660-Toner-Cartridge), V4ink offers the cheapest place to buy printer ink(http://www.v4ink.com/Brother-TN630-TN660-Toner-Refill). Just check out our website for more options. We have compatible as well as genuine replacements available for your Brother DCP-L2540DW.
|
|
| Reset guide of Cf400x toner |
[06 Feb 2017|01:55pm] |
Getting the toner cartridge (http://www.v4ink.com/) replacement process underway starts with a workspace that is free of clutter. Place newspaper or craft paper on a flat surface to catch any toner that may be spilled during the refilling process. It's probably best to empty the old remaining toner straight into a waste can to avoid spreading it around the room. It is also wise to wear disposable gloves when refilling printer cartridge (http://www.v4ink.com/)
Instructions for Refilling HP cf400x (http://www.v4ink.com/HP-CF400X-201X-Color-Toner-Cartridge) Cartridges with Refill Ports
Here are the steps to refilling HP ink cartridges (http://www.v4ink.com/) that have existing refill ports.
Some of the supplies that are required include:
• Phillips screwdriver
• Flat screwdriver
• Needle-nose pliers
• Toner
• Smart chip
1. Using the Philips screwdriver, remove the screws on the side of the cartridge to reveal the sealing plug. Position the flat screwdriver underneath the seal to gently loosen it. Use the needle-nose pliers to pull the plug off the cartridge.
2. Empty any toner left inside the cartridge. Before opening the bottle of toner, turn it upside down and tap it firmly on a flat surface to loosen the toner so that it will flow freely. Make sure that the cap is secure before tapping the bottle.
3. Tilt the cartridge to a 45-degree angle and fill the cartridge with toner.
4. Place the sealing plug back in its place and replace the smart chip on the cartridge before putting it back into the printer. The chip may need to be gently pried from its location. Insert the cartridge into the printer. Print a few pages to check the quality of the print.
Instructions for Replacing HP Laser Printer Cartridges Without Refill Ports
When the print cartridge does not have a refill port, the task becomes a bit harder, but can still be done. Some of the supplies needed are:
• Toner
• Universal toner cartridge hole-making tool
• Electrical tape
• Smart chip
1. Use a universal print cartridge (http://www.v4ink.com/) hole-making tool to create a hole in the cartridge. Remove the round plastic piece that will be burned out after the new hole has been made.
2. Empty all remaining original toner from the cartridge. Attach the pouring spout to the toner bottle, and refill the cartridge with toner. Seal the newly created hole with a small piece of electrical tape.
3. Replace the smart chip.
|
|