| Problems related to replacement of printer cartridge |
[24 Jan 2017|01:44pm] |
| [ |
mood |
| |
 безумное |
] |
Problems related to replacement of printer cartridge(http://www.v4ink.com/)
This year I bought a Brother printer, but a month after I used the printer I encountered the replacement problem of toner cartridges. The first question that happened to me is where is the cheapest place to buy printer ink (http://www.v4ink.com/Brother-TN660-Compatible-Toner-Cartridge). Then I googled it and finally found V4ink.com. I placed an order of brother tn 660 (http://www.v4ink.com/Brother-TN630-TN660-Toner-Cartridge) on the V4ink website. The delivery service is good so that several days later I received the product. It is the first time for me to replace printer ink (http://www.v4ink.com/). So I learned how to install printer cartridge properly online: first, your printer ink cartridges will last longer if you do not remove your cartridge from the protective wrapping until it's ready for use; Second, the ink cartridge should be placed upright for at least 30 minutes prior to use, which will allow the ink to flow down to the print head and allow any oxygen bubbles to rise up and away from the print head; Third, be sure you've removed the plastic strip from the ink cartridge; Fourth, install the print cartridge; Fifth, run the head cleaning cycle at least one time; Sixth, print a test page to make sure the print cartridges are installed and functioning properly. I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" and the Toner LED is still flashing. Then I verify I replaced only the toner cartridge and not the drum unit since the Brother machine has separate consumables - the toner cartridge and the drum unit. When replacing the toner cartridge, I installed a brand new, unused genuine Brother toner cartridge in order to reset the toner status. Swapping toner cartridges from one machine to another or installing a partially used toner cartridge may cause this issue. Brother machines control their image quality for the most suitable print quality by monitoring toner consumption. If you install a partially used toner cartridge, your Brother machine is unable to recognise toner consumption correctly which will cause this issue. If you install a new genuine Brother toner cartridge but the "Toner Low", "Replace Toner" or "Toner Ended" error indication remains, the toner cartridge may not be installed correctly.
Reinstall the toner cartridge, referring to the instructions on how to replace the toner cartridge. That is how I solved the problem.
|
|
| Knowhow of Installing Brother TN450 TN420 Compatible Toner Cartridge |
[24 Jan 2017|01:48pm] |
| [ |
mood |
| |
безумное |
] |
Knowhow of Installing Brother TN450 TN420
(http://www.v4ink.com/Brother-TN420-TN450-Compatible-Toner-Cartridge) Compatible Toner Cartridge
I own an Brother-DCP-7060D Monochrome Multifunction Laser Printer. It can scan documents in 3 seconds and print extremely fast with great quality. It is easy to operate. Toner replacements are not very expensive. But I have to learn how to install brother tn420 (http://www.v4ink.com/Brother-TN450-TN420-Toner-Cartridge-4-Pack) toner cartridge in the printer. First of all, I found the cheapest place to buy printer ink (http://www.v4ink.com/Brother-TN630-TN660-Toner-Refill) on the website www.v4ink.com.
How to Install a Brother TN420 Toner.
Note: Before doing anything else, make sure that the Brother printer is powered and on during the process. Changing the cartridge with the power off will not reset the replace toner mode of the printer, causing the printer not to recognize the new toner cartridge.
Step 1 – Open the front panel of your Brother laser printer and carefully remove the DR-420 drum from the printer.
Step 2 – Press the green tab in the DR-420 drum unit to release the Brother TN420 toner cartridge from it.
Step 3 – Install the new Brother TN420 toner cartridge. Note that the TN420 toner cartridge and the DR-420 drum unit are purchased separately. Once you hear a small click on the drum cartridge that indicates your TN-420 toner cartridge is already locked in place.
Step 4 – Finally, install the DR-420 drum unit into the Brother laser printer and firmly close the front panel. And you can check your printer’s setting now to see if the printer had recognized the new Brother TN420 toner cartridge. Once you everything’s okay, you can finally proceed in printing your documents.
For quality Brother TN420 toner cartridge and DR-420 drum unit that won’t cost a fortune, visit V4ink.com. V4ink offers a great selection of Brother toners, ink cartridges and drum cartridges. Whether you are looking for compatible or OEM cartridges or black and color cartridges for your Brother printers, V4ink got it covered.
I highly recommend V4ink compatible cartridges as they are professionally built, guaranteed to match OEM cartridge performance and, of course, cheap toner cartridges (http://www.v4ink.com/Brother-TN450-TN420-Toner-Cartridge-Cheap-Toner-Cartridges). And without any question or extra fee asked, V4ink will ship a replacement cartridge on your way as fast as they can. Because that is how V4ink prioritize and value their customers.
|
|
| Summary of common faults of printer |
[24 Jan 2017|01:50pm] |
| [ |
mood |
| |
безумное |
] |
Summary of common faults of printer
Those who used HP/Canon ink jet printer might encounter some faults. How do we solve them?
What are the causes of printing stripes? How do we solve it?
Answer:
1. The air entered when installing the cartridge. We can solve it by cleaning the print head one or two times.
2. It may be caused by incorrectly installing the toner. Reinstall the toner and clean the print head one or two times.
3. The print head is old and required to change or mend.
The machine cannot identify the newly installed cf400x (http://www.v4ink.com/Hp-210x-CF400X-CF401X-CF402X-CF403X-Toner-Cartridges-Hp-210x-4-Pack) and 201x (http://www.v4ink.com/HP-CF400X-201X-Color-Toner-Cartridge) ink cartridges (http://www.v4ink.com/). How should we do?
Answer：
1. The cartridge with chip cannot be identified for hand touching chip or chip sticking dust. We can reinstall cartridge after wiping the chip with dry tissue.
2. The spring contact touching the chip on the print head is broken or damaged
3. There occurs elastic failure of spring plate on print head in the printer without chip.
The printed red picture is lighter than the one on computer, why and how do we solve it?
Answer：
The picture printed by a printer is not exactly the same as the actual image of the computer, which has a lot to do with computer graphics or its own pixels. If adjustments are needed, you can adjust color according with the needs through file→print→attribute→customize→advanced dialogue box.
When Epson printer is printing or copying, the computer prompts the non-original ink cartridges. Can we continue to use it?
Answer:
The Epson manufacturers set it up on the printer. When non-original-cartridge is prompted, click yes. It would not have any influence on the printing of toner.
A month ago EPSON C20 printer can be used normally. But it cannot print after being idle for a month.
Answer:
Without using the printer for a long time, the print head may get dry. You can solve the problem by cleaning the print head. Even if you do not use the printer, for best quality of printing, we recommend that the machine be able to run once a week to fill the machine with ink. This is good for the maintenance of machine.
|
|