Thursday, February 9th, 2017

Get familiar with printer supplies-the daily maintenance of toner cartridges

1, the installation and storage

Toner cartridge is an important component in the laser printer, a direct impact on the quality of printing. Cartridge installation is actually very simple, as long as the cartridge removed from the bag, out of the seal, and then to the drum axis axis rotation, the toner in the drum in the distribution, and then installed on the printer can be.
As for the preservation of toner cartridges, in fact, more simple. As long as the cartridges stored in the original packaging bags, can be stored at room temperature. Do not let the sun direct exposure, otherwise it will affect the life of the cartridge.

2, maintenance issues

As the laser printer imaging is dependent on the photoconductor drum exposure. When the toner cartridge encounters strong light, the inner and outer layers of the toner cartridge are turned on, so that the voltage of the toner cartridge is different from the voltage at the unexposed place, where the toner image can be attracted during the fixing process. However, a certain point of exposure to the drum time and the number of times are limited, especially in the long exposure to continuous damage to the cartridge more severe. So users usually should be used a lot of attention to the maintenance of toner cartridges.

   1) Do not make the drum exposed to direct sunlight or other strong light sources.
   2) Do not replace the toner cartridge in bright light, it should be as soon as possible to complete the installation process.
   3) When the toner cartridge is removed from the printer, immediately put it back in the box or thick soft linen wrap.
   4) If the toner cartridge from a cold place into a warm place and then set aside an hour or longer before use.
   5) the drum light barrier shielded from external light source in order to protect the photosensitive drum, do not open the drum light barrier.
   6) Do not touch the photosensitive drum surface by hand, and to prevent the drum surface to scratch hard objects.
   7) Do not put the toner cartridge in a place of high temperature and high humidity.
   8) to ensure that the cartridge away from the monitor, hard drive, floppy disk drive, or any other magnetic material.

Printer ink refill, help you print high-quality documents, photos, and graphics.
Cheapest place to buy printer ink: v4ink.com
(1 comment | Leave a comment)

Get familiar with printer supplies

We all know that the core component of the laser printer is the cartridge, toner cartridges directly affect the quality of the print, so we need to come to an independent understanding of the cartridge. This article includes the following four parts:

First, the importance of toner cartridges and toner

Before talking about toner cartridges, we need to briefly understand the relationship between toner cartridges and laser printers, we can first look at the laser printer works! The working principle of black and white laser printer, for example, when the computer sends data to the printer through the cable, the printer will first receive the data temporarily stored in the cache, when received a complete data sent to the printer after the processor, These data are processed into data sets of similar data tables that can be used to drive the print engine. For laser printers, these signals are a set of pulses that drive the laser head.

Well, laser printers began to work, in fact, the core technology is the electronic imaging technology, which combines the principles of imaging and electronics to generate images, the core component is a photosensitive cartridge. Laser emitters emit laser light on a prism-shaped mirror, with the rotation of the mirror, the light from one end of the drum to the other end in turn sweep (half way through a variety of focusing lens, so that the surface of the drum to scan the light is very small), then the drum to 1/300 inch or 1/600 inch stride is rotated and scanned line by line in the next performed. In fact, the drum is a surface coated with organic materials, cylinder, pre-charged with, when there is light exposure to the parts of the exposure will occur resistance of the reaction. The computer sends the data signal to control the laser emission, scanning the surface of the drum in the light constantly changing, so that some places will be exposed, the resistance is smaller, the charge disappeared, and some places are not subject to light exposure, Charge, and ultimately, the drum surface formed by the charge formed by the latent image. As shown in Fig.

How does the latent image become the actual printed image? Toner plays a key role in the toner is essentially a charge of fine plastic particles, the charge and the surface of the charge on the drum opposite polarity, when the surface of the drum with a charge through the ink roller, the charge The location of adsorption of toner particles, latent image becomes a real image. While the drum rotation, another group of transmission system will be sent to the printing paper, the print tape and the drum surface polarity of the same but much stronger charge, then the paper with toner cartridges, toner cartridges surface of the toner is attracted Onto the printing paper, the image is formed on the surface of the paper. At this time, the toner and the printer are merely attracted together by the attractive force of the charge, and the toner of the plastic mass is melted by heating at a high temperature before the printing paper is fed out to the printer, and solidifies on the surface of the paper sheet during the cooling.
After the toner is attached to the paper, the drum surface continues to rotate, passing through a cleaner that removes the remaining toner to enter the next print cycle. Can be seen in the process cartridge accounted for a very important position.

In fact, the laser printer is the most critical components. Because it not only determines the print quality is good or bad, but also determines the cost of printing. This is because the laser printer, 70% or more of the imaging units are concentrated in the drum, the print quality is good or bad in fact, it is largely determined by the cartridges. The cartridge and the printer is a consumable, the use of a period of time and reach a certain number of sheets after use need to be replaced, so choose the laser printer cartridge has a lot of knowledge.

Printer ink refill, help you print high-quality documents, photos, and graphics.
Cheapest place to buy printer ink: v4ink.com
(1 comment | Leave a comment)

Toner cartridges facing “growing demand” globally

A study of the global office stationery and supply market found that growing sales of printer cartridges in particular was one of the “top three emerging trends” worldwide.

The study, by market analysts Technavio, analysed the “key trends expected to impact the market” from 2015 to 2019, with an emerging trend defined as “a factor that has the potential to significantly impact the market and contribute to its growth or decline”. Of the top three emerging trends “impacting” the global market, Technavio named the “growing demand for computer/printer supplies”, with ink cartridges pointed at in particular.

The analysts stated that “IT integration and industry automation has driven the market for this segment”, and added that “the toner cartridges category has become the largest contributor in this market as their demand is rising”, with a compound annual growth rate (CAGR) of over nine percent through to 2019. Technavio also points to “leading manufacturers” including Brother, Canon, HP Inc and Epson, as well as “retailers like Staples, Office Depot and Walmart”.

Worldwide, the office stationery and supply market “is likely to exceed” 217 billion (€191 billion) by 2019 because “the developed markets for office stationery and supply products are growing at a very high rate”, with particular markets seeing growth including the USA, UK, Germany, Canada, France and Japan, though “major growth is also expected” in developing markets such as China, Brazil, South Korea and India”.

The other two main trends the analysts have identified include “multichannel marketing”, with various channels available “through the online or offline medium[s]”, and “business expansion through mergers and acquisitions”, a key theme for the remanufacturing industry of late. A fourth and lesser trend is that for “packaging innovation and green products”, including recycled packaging and “green office supply products”, which could include remanufactured cartridges.

Brijesh Kumar Choubey, Senior Analyst at Technavio for the general retail goods and services industry, commented: “Although the demand for paper-based products is on the decline in developed markets due to industry automation and IT integration, growth prospects have increased for the printer and computer supplies manufacturers.”
(1 comment | Leave a comment)