| Installation instruction of Brother TN420/TN450 |
[15 Feb 2017|04:26pm] |
These instructions explain toner installation procedures for a brother tn420 / tn450 toner cartridge.
The original toner cartridge that was included with this machine may either be a starter, standard, or a high yield cartridge. When the toner becomes low, the TONER LED indicator light will flash continuously until replaced. Once the toner cartridge is empty, the printer will enter a “REPLACE TONER” mode that ceases print functionality until the toner cartridge is replaced. A new and unused toner cartridge will reset the “REPLACE TONER” mode.
Before you begin please take time to perform the following steps to ensure that the new print cartridge is properly detected by your Brother printer:
1. Check to ensure that the dial on the left side of the brother toner cartridge is in the position as illustrated in the image below. If not, turn the dial counter clockwise until it matches the position in the image.
2. Check to make sure that the printer is powered up during the entire process. Changing the cartridge with the printer powered off will not reset the “REPLACE TONER” mode. In the event that the printer is powered off when the cartridge is installed, you will need to remove the cartridge and repeat step one before reinstalling the cartridge.
Replacing the toner cartridge
1. Make sure that the machine is powered up.
2. Open the front cover of the machine.
3. Remove both the drum unit and toner cartridge assembly.
4. Push down the green lock lever and take the toner cartridge out of the drum unit.
5. Unpack the new toner cartridge. Hold the cartridge level with both hands and gently shake it from side to side several times in order to distribute the toner evenly inside of the cartridge.
6. Pull off the protective cover.
7. Note: Before installing this cartridge, please check to ensure that the dial on the left side of the new cartridge is positioned identical to the image below. If not, turn the dial counter-clockwise until it matches the dial position in the image. It is imperative that this dial be locked into position as illustrated to ensure that the printer detects that a new cartridge has been installed and resets the “REPLACE TONER” mode.
8. Put the new toner cartridge firmly into the drum unit you hear and feel it lock into place. If installed successfully, the green lock lever will lift automatically.
9. Clean the primary corona wire inside of the drum unit by gently sliding the green tab from right to left and left to right several times.
10. Reinstall the drum unit and toner cartridge assembly back into the machine. Close the front cover.
|
|
| How to Replace Your Samsung Printer Cartridges |
[15 Feb 2017|04:30pm] |
Part of saving time is just being prepared. When an ink cartridge runs out, you don't want to have to drop everything and run to the store. If your office uses Samsung printers and supplies, you may want to get acquainted with Samsung printer cartridge replacement. When it's time to swap out an old printer cartridge, you can save time by following some simple steps. Here are some simple instructions for replacing your Samsung printer cartridges, so you can get back to printing.
Replacing Printer Cartridges:
1. Open the printer utility software. Samsung tries to make replacing samsung printer cartridge simpler by automating most of the steps for you. Explore your printer utility software and learn a bit more about how it works. To replace one of your Samsung printer cartridges, you'll need to open the cartridge replacement utility.
2. Move the cartridge head into place. Have your Samsung printer cartridges ready and follow the utility instructions to move the cartridge head into place.
3. Remove the old ink cartridge. Open the panel concealing the printer head and the old Samsung printer cartridges. Release the clips holding the empty one and pull it out. Remember to recycle your old Samsung printer cartridges. Samsung may even buy them back.
4. Prepare the new cartridge. Remove the appropriate Samsung printer cartridges from the packaging and shake them vigorously.
5. Insert the new cartridge. Remove the tag from the bottom of each Samsung ink cartridge, being careful not to touch any contacts or circuitry. Slip each cartridge into its space and press down until it clicks into place.
6. Close the printer. Close the printer lid or panel. The printer head should slide back into place and start charging your new cartridges.
Samsung Printer Cartridge Tips:
1. Samsung may recycle your hp 201x toner, or you can donate them to local recycling programs.
2. Unless your printer is malfunctioning, avoid printing test pages that can use a lot of ink.
|
|