How to clean the waste toner?
If you are familiar with the printing supplies, you may be aware of the use of toner after a period of time after the toner will slowly reduce until run out, most people will choose to continue to add toner after the use of toner, in fact, many people do not know the cartridge in the replacement When the Canon 045H Toner is not really exhausted. Like the remote control car battery, although the car can not move but the battery is still used in the remote control. In fact, the cartridge is the same reason. So the toner cartridge in the powder to pay special attention to clean up. If you do not clean up, add the toner and the original carbon powder may be incompatible and the formation of block solid.
Here, I’d like to share with you, the cartridge on the toner residue cleaning the specific method to clean the toner cartridges residual waste old toner is divided into two parts.

First, the cleaning of the toner cartridge. When cleaning the cartridge, the first thing to do is clean the waste toner box and the toner in the toner cartridge, and then use the brush to brush away the toner remaining on the edge of the toner cartridge. Of course, in the brush can not clean up the place can use a hair dryer to clean up the waste toner.
To find compatible CRG-052 toner on V4Ink.
After the toner inside the toner cartridge is clean, the toner around the toner cartridge also needs to be cleaned.

Second, the charge roller, magnetic roller cleaning. After the cleaning of the waste toner in the waste toner box, the cleaning of the waste powder on the charging roller and the magnet roller is carried out. The specific method is we should clean the charging roller and magnetic roller, we must first find the charging roller and magnetic roller fixing screws, screwdriver with a screwdriver. Carefully remove the charging roller from the magnet roller from the drum. Most of the charging roller at both ends with a plastic gear, wipe the front end of the charger before removing the gear.