| Why the scaffolding planks can be mainstream in the projects |
[16 Mar 2017|04:17pm] |
Construction from the points of development reflects a national science and technology level and the strength of the country. The earliest time people are building high-rise building with the help of a wooden scaffolding and then get on wooden plank, next above for related construction work. But with the development of construction industry and construction level of ascension, wooden plank problem is very prominent. First: wooden plank bearing capacity is limited, because the wooden plank wood structure, if want to increase its bearing capacity, then the thickening of the thickness of the wooden board is the inevitable choice. But wood scaffolding planks to thicken the weight also increased dramatically, inconvenient disassembling and transport.
At the same time, due to the wooden board also has the fear of fire, afraid, afraid of insect pest, preservation conditions demand is very high. And with the development of industry, the demand of the timber for the destruction of nature is very big. In this environment, the emergence of new type of steel board, it is very reasonable. Steel scaffolding planks in adhering to the original advantages of wooden board at the same time, also has the following a few big characteristics.
The first: high weight capacity, the principle of the adoption of steel and frame steel scaffolding planks, can carry more heavy weight, convenient construction.
Second: light steel board quality, and tear open outfit is convenient, because of good card buckle fixed, more secure than wood board.
Third: the unique non-slip design, can prevent slippery the scaffolding planks to use safety. Steel scaffolding planks don't consider the problem such as fire prevention, the pest, can use at any time.
Fourth: transportation is convenient, safe environmental protection. And because the steel scaffolding planks commonly used galvanized processing, in corrosion resistance, oxidation resistance, etc., has the very good performance.
Which is based on these advantages, appears to be very fast steel scaffolding planks of wood they occupied the market. With the products and promote the reform of also is very natural. The emergence of such as: steel pedals, the emergence of the steel scaffolding, etc. Is an industry in the development of science and technology and green environmental protection requirements, the science and technology of new building materials.
|
|
| Construction will be safe when using cuplock scaffolding products |
[09 Mar 2017|04:35pm] |
Construction workers are very safe, we don't need high stability has been carried out on the scaffolding installation type adjustment is also very save time. Except on the stability of assured we also find disassembly transport are very have an advantage.
Safety engineering is always focused on the things, so no one person for engineering when considering construction worker safety into consideration. In the construction site management is more prominent. Many engineering in construction will choose a round button scaffolding why will happen to coincide choice this scaffolding? There is certainly a great about it, so now we have to parse the about the advantage of such a scaffold. Supervise the construction site management more is in the time or is normative.
First of all we can say that time most of the time in the transport process to save time is also very important. In general ordinary scaffold is need a lot of the collocation of small parts so when transportation need some specific vehicles to transport auxiliary materials. In fact in the auxiliary material also can appear a lot of loss on the way, this is very unfavorable for engineering. So we use the Cuplock Scaffolding will avoid such problems. We auxiliary material is very few, only need to transport a lot of the main steel structure to the site after start simple installation is very simple to save time.
We wouldn't be in the transport loss on the way our parts. To install, we will find that round buckle scaffold with an automatic locking structure, as long as it is installed on whichever Angle then we will see in the form of a 3 d display to receive strength evenly in the benefits of.
|
|
| Cuplock scaffolding a new choice for you to use in the construction project |
[01 Mar 2017|03:23pm] |
Cuplock Scaffolding before put into use, the cuplock set frame completely remove all sorts of sundry, according to the requirement of the bearing capacity of foundation, foundation protective measures, to do a good job of reliable drainage.
Based on recent decades cuplock scaffold technology progress and have experience in construction management, preparation of industry-wide, cuplock scaffold construction safety rules of time seems to have ripe. Bamboo scaffolding, metal scaffolding and new climbing scaffold has the local codes and manufacturer's enterprise standards, and has several years of practice, such as can formulate unified standard with the scaffold construction management standardization greatly.
Look from actual condition, due to China's vast territory, technology development level is differ, so from the bamboo scaffolding to climb as well as the application. So the unified regulations should be made to include:
Bamboo scaffold erection and use of the discipline. Fastener type steel tube frame and cuplock, the portal frame construction regulations. In these three kinds of scaffolding, in addition to steel pipe frame, the patented product will have difference, but from the construction management to ensure safe conditions are completely can be unified.
On the bridge, hanging bar, hanging basket frame, socket frame etc. Beijing already has a corresponding safety procedures. According to the new use of experience after revision can meet the requirements. For climbing or some cuplock scaffold pilot application and promotion of new products should establish the corresponding management system, in order to facilitate the development of new products and the use of safety.
|
|
|
[20 Feb 2017|03:37pm] |
Due to the current domestic application of inferior bowl scaffold from the material control, manufacturing process to design philosophy, have appeared serious problem, cause its security and reliability are major problems, design and construction units and supervision units in order to increase the security of the system, can only be infinitely require the contractor to reduce the length of the rail and to increase the number of stud to increase bearing load capacity. The construction site can be found that a large number of applications of stud spacing of only 0.3 m.
1, even the wall fastening and displacement of reinforced bar. Affecting the construction of the site, measures should be formulated in the technology sector, may shift change effort, the operator shall not, without even the wall displacement of bar.
2, observe the scaffold whole or partial vertical deviation, especially in observation scaffolding corners, breaking in two side port, whether the deflection, sinking. If found a strange person, shall immediately organize personnel for reinforcement.
3, check carefully whether the federated eye network root bundle loosening, whether the net twine breakage, found loose timely recovery, finding a breaking change in time.
4, often check shop mat bamboo basketry, timely repair hamstring breaks, fill the hole. And at the same time check the colligation point of bamboo basketry.
5, supervision and use the pile up material, no more than the construction load. Scaffolding
for masonry, pile of bricks, for example: three layer below the line standard brick, porous brick four layer below the line.
6, remove accumulated in scaffold materials, brick, concrete block dangerous parts of the clutter.
|
|
| What are the functions of scaffolding braces in the scaffolding planks |
[18 Nov 2016|03:14pm] |
Steel board, as a kind of indispensable building materials for construction, was widely welcomed, site construction personnel, but also has a lot of attention in the process of using, to ensure the safety of construction personnel, we provide you with some knowledge of safe use, for your reference. ADTO under light steel springboard factory as a professional manufacturer of steel manufacturers to introduce you to steel springboard use safe sense, your life and convenient production.
1 cross support, horizontal plane, scaffolding braces
and connecting rod, lock arm should comply with the provisions of the structure. Two different products, door frame and accessories shall not be mixed in the same steel springboard.3 cross support, horizontal plane, scaffolding braces should follow the installation door frame in a timely manner. Four part of arm lock, hook must is locked. Horizontal reinforcing steel bar, scissors installation shall conform to the requirements of the construction, and the erection of steel springboard synchronized. After installation, carefully check the stud connection of connecting rod set of rod installation, against the pedal hook rod firmly connected to the shelf. The choice of materials, and strive to achieve general, turnover use, easy to maintain.
|
|
| How is the safety property of scaffolding planks in construction |
[27 Oct 2016|03:42pm] |
With the continuous development of shipping industry, more and more is also high to the requirement of shipbuilding materials. Obviously, choose when shipbuilding material quality but also the whole ship safety performance is good or bad, absolutely cannot careless.
Hot dip galvanized steel scaffolding planks is shipbuilding, repairing yard and build the scaffold construction and installation enterprise construction engineering supporting the use of a kind of form a complete set of tools. scaffolding braces
with light weight, corrosion resistance, high strength, prevent slippery effect is good, forming specification, good appearance, durable (normal construction can use continuously 6-8 years).Our company production of hot dip galvanized steel scaffolding planks sand leakage hole design, suitable for shipyard painting workshop. When using this product, set up scaffolding steel pipe can be reduced, and can improve the efficiency of building. Lower than wood, scrapped after so many years still can recycle 35% - 35% of the investment etc, deeply the general shipbuilding, petrochemical, construction of the high praise and was used.
Say so many, everybody's attention or hot dip galvanized steel scaffolding planks of safety performance
Hot dip galvanized steel scaffolding planks good safety performance:
1. The wooden plank easy cracking, corrosion, easy to burn, prone to accidents. Angle steel sheet is corrosion loss, hot dip galvanized steel scaffolding planks has corrosion resistance, fire, etc.
2. Our company produces the steel scaffolding planks to regulate the arrangement of convex molding hole, anti-slip coefficient is high, the effect is good. The scaffolding planks of stiffened plates on either side of the bow at the bottom of the design and strong welding more increased its strength, 3 meters long scaffolding can take 5-6 people standing at the same time without deformation
|
|
| Ringlock scaffolding scaffolders works hard to make sure the working safety |
[17 Oct 2016|03:18pm] |
The Brent field under the ringock scaffolding, which started production in 1976, consists of four large platforms – Alpha, Bravo, Charlie and Delta.
At its peak in 1982, the Brent field was producing 504,000 boepd – enough to power half of the UK’s homes.
The field has since been earmarked for decommissioning.
Brent Delta is the latest in a string of assets affected by harsh storm condition.
The Delta platform is 300m high – double the height of the London Eye and equal to the height of the Eiffel Tower.
A Shell spokesperson said to Energy Voice: “Shell can confirm that as a result of the recent bad weather scaffolding on the Brent Delta platform has become displaced.
“Following an assessment of the situation, including liaising with DECC, we have concluded that the safest method of recovery will be a controlled drop onto the seabed. Once on the seabed it will be recovered by an ROV that is currently on the platform. The ringlock scaffolding is not in the vicinity of any pipelines on the seabed.
“It is anticipated that there will be an appropriate weather window to complete the operation this week.”
|
|
| The biggest causes of workplace deaths |
[23 Dec 2015|02:41pm] |
|
One of the injured men, Ashley Burton, said the incident had affected him deeply and admitted to still being nervous about climbing ringlock scaffolding to do his work. The court was told the incident was caused by a number of parties carrying out their allotted tasks with little regard for others in terms of co-operation and co-ordination. The scaffold was overloaded with people and building materials and there was no suitable site supervision nor management of the tasks to be undertaken. He was fined £1,000 and ordered to pay costs of £6,832. Martin Taylor, Principal Contractor of the same company pleaded guilty to breaching regulation 22(1) of the Construction (Design and Management) Regulations 2007 at court today. He was fined £1,000 and ordered to pay costs of £6,832. HSE’s Inspector Russell Smith said: “Falls from height are the biggest causes of workplace deaths and it’s crucial that employers make sure work is properly planned, supervised and carried out to protect staff from these risks.” “In this case, it is extremely fortunate that nobody was killed, however, it could have been so much worse. If there was adequate management of the construction site, this incident could easily have been prevented.” John Marton, Principal Contractor of Select Estates Ltd of Hurst Green pleaded guilty to regulation 22(1) of the Construction (Design and Management) Regulations 2007 at court today (15 March).
Update Cancel
|
|
| Heavy-duty tube, board and fittings |
[14 Dec 2015|02:15pm] |
Heavy-duty tube, board and fittings
Generation are suppliers of a full range of scaffold tube, boards and fittings designed specifically for the heavy industrial market.
High quality aluminium tube stocked in various lengths up to 6.0m (20ft) and fully compliant to Grade 6086 T6 / EN755 (48.3mm O/D x 4mm)
Generation's BS EN 12811-1 steel boards are available in various lengths between 6ft and 13ft. Fire retardant and long lasting these boards are perfect for harsh environments and offshore use.
Also available are fire retardant timber boards, specified to BS EN 13501-1 giving either a Class 1 or a Class 0 Rating (Euroclass B & C). Generation's Scaffold Fittings range offers extreme strength and value for money. Designed and manufactured to BS EN 74-1 and BS1139 Section 2:1:1991 (EN74 1998) they provide a strong yet economic solution to scaffolding coupler needs.
Technical specialists in scaffold design
Keeping pace with the need for more innovation and quality from our customers, Generation's fully qualified technical specialists also aid in the development of new products ensuring that they are safe, reliable and easy-to-use, as well as provide our customers with expert support in the end-use application.
|
|
| Heavy-duty tube, board and fittings |
[14 Dec 2015|02:12pm] |
Heavy-duty tube, board and fittings
Generation are suppliers of a full range of scaffold tube, boards and fittings designed specifically for the heavy industrial market.
High quality aluminium tube stocked in various lengths up to 6.0m (20ft) and fully compliant to Grade 6086 T6 / EN755 (48.3mm O/D x 4mm)
Generation's BS EN 12811-1 steel boards are available in various lengths between 6ft and 13ft. Fire retardant and long lasting these boards are perfect for harsh environments and offshore use.
Also available are fire retardant timber boards, specified to BS EN 13501-1 giving either a Class 1 or a Class 0 Rating (Euroclass B & C). Generation's Scaffold Fittings range offers extreme strength and value for money. Designed and manufactured to BS EN 74-1 and BS1139 Section 2:1:1991 (EN74 1998) they provide a strong yet economic solution to scaffolding coupler needs.http://www.adtomall.com/scaffolding-coupler
Technical specialists in scaffold design
Keeping pace with the need for more innovation and quality from our customers, Generation's fully qualified technical specialists also aid in the development of new products ensuring that they are safe, reliable and easy-to-use, as well as provide our customers with expert support in the end-use application.
|
|
| Demanding Project Highlights Harsco’s Customer Service Abilities |
[25 Nov 2015|02:34pm] |
“From the outset the Harsco team were extremely professional, pro-active and advisory, managing an extremely short mobilisation period with ease,” says Chris Cuthbert, Project Manager for the main contractor, Kier. “We had regular site meetings to make sure any design changes were dealt with in a timely fashion. Unfortunately one of the three main sub-contractors under-performed drastically which put a lot of pressure on the Harsco team due to late changes. With this in mind, and with the Harsco people being so pro-active and reactive, the project finished on time. Without this support I’m sure the project would have overrun.”
Despite the presence of asbestos and the need for frequent changes during the life of the project, Harsco was able to provide a CUPLOK® scaffolding system which allowed the windows at Uppingham Community College to be replaced in-line with an extremely demanding schedule. “This was certainly a project which provided its fair share of difficulties, but the Erection and Dismantle team at our Birmingham branch in Tamworth was more than equal to the challenge“ explains Harsco’s Branch Manager Steve Bollans. “The scaffolding boards system itself was straightforward enough, but there were many other factors which made the job difficult.” http://www.adtomall.com/scaffolding-planks
|
|
| offshore workers may lost their jobs in the next five years. |
[17 Nov 2015|04:05pm] |
|
Although some of the job losses will come with the retirement of older workers, the report reveals that more than half of the workforce is under the age of 45. However it does predict 12,000 new staff will be needed to clean up the North Sea and dismantle rigs, while offshore fracking could create jobs.
A recent report by EY, the financial consultants, was commissioned by Oil & Gas UK, Opito, the safety body, and the Department for Business, Innovation and Skills has said that employment in the North Sea oil and gas sector is set to fall from 375,000 to 340,000 within the next five years as exploration and production continues to decline.
Despite record investment in the North Sea last year only 15 wells were drilled as production costs soared more than 15 per cent. The sharp rise in costs has led oil and gas companies to focus their investments in Norway and North America rather than the North Sea.
“This report confirms that we are in for a very rough time over next few years and the industry needs the government to act. For every offshore job that is lost, three more industry jobs on the scaffold boards are lost onshore.”
|
|
| Instruction for using construction scaffolds on high level buildings |
[08 Sep 2015|12:01pm] |
|
For the high level buildings, the construction scaffolds are erected from bottom to top with the building’s construction process. The construction scaffolds shall be inspected for acceptance before they are put into use.
Scaffolding For Sale, Scaffold For Sale
Once the scaffold frames are erected, relevant organizations and climbing frame entities to check and adjust following items and making relevant records.
For the parts which are erected by coupler scaffolding tubes, there shall be a snap check of 50% of the fastening degree of couplers. Only with a qualified ratio over 95% can they be put into use; there shall be a thorough check on the joints which are connected by bolts; there shall be a check over the whole frame body of the scaffold; there shall be necessary check and adjustment on some items.
The working load on the operation platform shall be within the maximum limit and formworks proppings, steel wires and delivery tubes for concrete shall not be fixed on the scaffolds. It is forbidden to suspending any craning machines or equipment. For the construction on the external wall, the working load shall be confined within 300kg/m2 and the maximum story number for synchronized working shall be no more than 2 stories.
|
|